How Do You Clean The Coils On A Whirlpool Side By Side Refrigerator

It is very important to maintain your fridge regularly if you want it to last for many years. Part of this maintenance includes cleaning the refrigerator condenser coils.
Condenser coils are an important component of your refrigerator; without them, the refrigerant circulating inside the sealed refrigerator arrangement cannot be cooled properly. Dirty condenser coils can lead to college free energy bills at best and ruin food at worst.
In this article, we will talk about what condenser coils are for and how to clean them correctly.

Why do you need condenser coils

The performance of the fridge is supported by the correct apportionment of the special refrigerant. When the refrigerant changes from one state of aggregation to another, that is, from liquid to gaseous, the air within the refrigerating chamber is cooled.
Under pressure, the refrigerant from the compressor passes through coils, with the help of which the gaseous substance is cooled and converted back to liquid. So the refrigerant passes through the evaporator and absorbs heat from the refrigerating bedchamber, cooling it and everything in it. After that, the refrigerant goes back to the gaseous land and the cycle repeats.
In this way, the coils cool the refrigerant so that the refrigerator can constantly maintain a predetermined low temperature inside. If the coils fail or get too dirty, they cannot perform the function of condensing the refrigerant and the products inside the refrigerator compartment may deteriorate.

How to clean the condenser coils

The condenser coils should be cleaned at least ane to 2 times a year. Some Whirlpool refrigerators can be cleaned past yourself, while others can merely be cleaned by a specialist with special equipment. Before you commencement cleaning, make sure that the instructions for the refrigerator have permission to clean the coils yourself.

If you decide to clean the coils, follow this procedure:

1. Unplug the refrigerator from the wall outlet. Failure to exercise and then tin outcome in an electric daze.
2. Remove the grill panel that hides the condenser coils. For different models of refrigerators, information technology can be located either on the back of the unit or in front end. In order to remove the grill, lightly printing on it with your hands and pull it towards you lot – information technology should come up out of the grooves.
3. Use a soft dry brush and vacuum cleaner to remove grit and dirt from coils and coils. Whirlpool has special brushes for just this purpose, you tin can find them in the refrigerator accessories sections.
4. After cleaning, make sure there is no grit on the coils. After that, put the grill in place, the protrusions on its edges should exactly fit into the grooves intended for them on the body. If the grille is in the correct position, you will hear a slight click.

5 Tips from Whirlpool fridge care professionals

In improver to cleaning the condenser coil, repairmen advise using other methods of servicing the refrigerator.

1. Make clean the condenser fan. The condenser fan directs air through the condenser coils, which helps them cool the refrigerant inside faster. Over time, the fan can become chock-full with dirt and grit, causing the fan to stop. You lot can use the aforementioned brush or vacuum cleaner that you used to make clean the condenser coils to clean the fan.

2. Clean door gaskets. Their purpose is to create a generally airtight seal around the refrigerator door. If juice, syrup, or other gluey textile dries on the gasket, information technology tin cause the gasket to stick to the fridge, which in turn may cause the gasket to break the side by side fourth dimension the door is opened. If you spill anything on the door gasket, just wipe it off with warm water, but do non use detergent as this may harm the gasket.

three. Clean the ventilation grill. Its openings must always be free from dust and dirt. It tin can be done from fourth dimension to fourth dimension in warm h2o and put back after drying.

4. Clean the baste holes. If you lot allow the drip holes to clog, h2o will starting time to build up inside your refrigerator, which will eventually bleed out when information technology is total enough.

5. Conform temperature command. This can assist your refrigerator run more efficiently and save yous coin on your energy bills. In most cases, you exercise not demand to run the refrigerator at full power to continue food at the correct temperature. Gear up the average values ​​indicated in the instructions – this will exist enough to prevent the nutrient from spoiling.

Source: https://100refrigerator.com/how-to-clean-the-condenser-coils-on-your-whirlpool-refrigerator/

Posted by: goldmanvizing.blogspot.com

Share this post